August 2022 pics and vids

[haknslash]

To fully resolve the panels buckling, I think the best approach would be a stiffer back brace channel for the panels and also a beefier and taller channel/track on the bottom.

Mine still buckle from time to time, mainly if my wife hits some rollers at a side angle where the boat rolls a lot. I haven’t upgraded my panel dividers yet but one thing I did do that seems to lessen the likelihood of it happening was making sure my bags were slightly rotated towards the outer side of the boat on each side rather than straight up and down. This seems to aim the bag away from the panel a little more than if it were straight up or aimed towards it. I did this during the fill process when the bag had maybe 10% water in it so that the bag could be tweaked and moved around/rotated. Obviously don’t want to go too much or cause any addd tension on the fittings or tubing but you should be able to adjust the bag a little to expand towards the outside more than straight up.