Activity Stream

By the way, you're floor and boat color looks just like mine. Sent from my SM-S721U using Tapatalk

Yep. Happened to me several years ago with a different boat than I have now. I was worried too, but never had any issues. If any bigger pieces got...

thanks, I talked to the mechanic at the dealer and he basically said the same thing. We had 2 full days on the lake after this with no issues so I...

At this point, I would use a normal sending unit adapter and skip the vee jet nozzle to get back on the water. The sending unit adapter has a...

Appreciate all the info. Honestly I'm stumped at this point. None of it sounds good, and I'm not sure where to go from here. :-| Do you happen to...

Not sure exactly which one will work for you. GM block is typically 1/4NPT into the engine. The oil line is 1/4NPT with a reducer for the...

Yeah, the compression fitting threads into the inside bottom of the tee, and then the whole thing screws into the block. So that port has internal...

The part you are looking for is called "Oil pressure adapter fitting" Your engine is based on 1996 to 1999 GM 5.7 V8 engine. A similar adapter...

Thanks @Holdmybeer - I really appreciate the quick reply. I looked into the 1/4” NPT tee options, but my setup seems to be a little different. The...

By now everything is most likely in the lake and gone. Just watch your temps and you are probably fine.

oil pressure sending unit tee. Search this exact thing and you will find all kinds. You need to know the thread size and type. 1/4" NPT is...

Thanks for all the answers. Sent from my iPhone using Tapatalk

check out Austin Keen, he is the unbelievable on a skim board.

Like Holdmybeer said, everything looks good. The black that you see is the shaft bushing and there's no way you can damage those cutting a rope. ...

Oh, and I agree. Doubt the rope hurt that seal. Now fishing line can sometimes get up in there. Sent from my SM-S721U using Tapatalk

I know the feeling exactly! I can have 10 people on the boat at times and not a damn one watching the rider except for me! Makes me ill! Sent...

Noticed some pics of the new 2026 G23 Nautique. + They had a foil conversion rack. It has a support for the foil mast on each side of the upper...

I watched a video on the new 2026 Centurion NV243 and noticed how they have HD cameras and upgraded screens. It will be interesting to see if Supra...

Just ordered a cap and rotor too. Its almost at the 300 hr mark since the last time I changed them, plugs and wires too. Cap was a little corroded...

Wait there's another filter besides the one under the floor? I just bought 3 of these barbed filters from O'Reillys.

I had a Supra tech tell me many years ago, they got many easy fixes b/c of: - bad gas and not changing that fuel filter - owners not keeping a good...

My tractor has 2 fuel filters that I had to find the hard way. I had justt done the full service and had maybe 10hrs since then amd it died in the...

Highly doubt a rope is going to bend anything. Just a flesh wound. I used to run over at least one rope each summer. The cause of too much going...

Saw this title and was worried I would fall out of my chair and spill my beer watching it. I didn't. Yet....

Just catching up. HA. Well that's embarrassing. Not sure how I got on that thread. Please excuse my lack of awareness. Sure hope he got it...

The bulletin should read "After we discovered we ordered a large quantity of un-returnable and inadequately sized fuel filters on this model, we...

When I owned my 2007 (325 motor), I think I changed that specific part 2x during my ownership - once when I purchased the boat b/c I did not have any...

Definitely has been more that 50 hrs or a year since I've replaced it :shock: Thank you