Quote Originally Posted by dyrmz134 View Post
I just starting getting paranoid about too much stress in that area as the rest is reinforced. But maybe I am overly concerned, and like to you said , not much to do about it.
I think its a concern because the load is focussed on the area where the two clips are at the top, thats a lot of pressure in a small space, I still have stock bags, and tested my single 1x1 angle iron on each middle diver panel, and the starboard side was ok, but port still popped in, I added the second angle iron to each middle panel today and will test that, I also have some flat stock I thought about using, perhaps up top to spread the load out, I will also think about the lower c channel screws, and perhaps even 2 more clips on the top of each side…. But I like to test things out 1 at a time to see what works….

As I mentioned still stock bags, but I will upgrade in the off season, so I am ok with building in some overkill…..