Quote Originally Posted by wolff supra21v View Post
Due to the sixty degree weather in IL this weekend I did not work on the boat that much.
Here are some pics and what I am thinking.
I connected actuator with the tabs and electrical switch system a screwed the tab to a post and here what I came up with I actual only have about 30 degrees of movement I was hoping for more around 50 degrees of movement. Here are some pics of the tabs mounted to the post 1st two with the tab all the way up and second two with the tab all the way down.

IMG_1760.jpgIMG_1761.jpgIMG_1762.jpgIMG_1764.jpg
Easy. Mount the actuator more towards the middle of the tab vs all the way at the far back end. That's what Moomba is doing with the autoflow.

Look at this pic of the autoflow. Moomba is getting their desired range of motion out of only 1 inch of throw on the shorter throw actuators...