Designing surf tabs out of auto trim tabs

[wolff supra21v]

Also here is a picture of the switch. this system seam like it will work nice. It has a key/throttle power option. (there is an extra wire and when it loses power it automatically puts the tabs in the up position.) I plan on putting this on a rocker switch and labeling it surf tabs only, it needs to be on when using the tabs. It would be nice if it remembered where it was when power back up so you would not have to reset everything but there is also 10 leds showing the location of either tab.

Also I am wanting to mount the actuators in the dark gray strip next to the swim platform mount and by looking at this with the platform back on I really do not need to raise the platform if I trim about 2" of the outer lip off of the platform next to the mounting bracket.