Quote Originally Posted by Razzman View Post
Exactly what i asked earlier in this thread! Unless this is corrected the proper way what do you do? Cut holes every year looking for water? I can't help but wonder what happens to the foam when frozen then thawed?
Razz,

You might have missed mnpracing's post wherein he indicated where he thinks the water is coming from on his boat, and that is at the very front of the ski locker where the false floor or liner does not mate up with the hull. After looking at my ski locker, I think that's where the water is coming in as well. Another said that when he stepped in his ski locker, water came up thru a hole about 6" forward of the rear drain. So it appears that water is getting down there in different ways, depending on the boat.

Also, again on one of mnpracing's post, the shop is going to cut an access hole in the floor in the bow area in order to access the front of the locker and seal that gap. So hopefully, that will be a permanent fix for mnpracing's boat.

Others are just trying to get some of the water out to prevent possible freeze damage and waiting to hear what SC has to say about the issue.

My boat is stored in my garage which never gets below freezing since the furnace is in the garage and right next to the boat so I haven't drilled any holes yet. My local dealer has contacted SC on my behalf so I am waiting to hear what SC has to say.