Quote Originally Posted by VA LSV View Post
That is a very detailed how to with some great pictures! The set screw was an unexpected thing when I did mine. You will need to install your prop before trying to remove the nut from the shaft. I blocked mine with a piece of wood but needed an extra pair of hands to hold the prop and wood in place while I was in the boat removing the nut. You don't need to pull the shaft out, just slide it back enough to clear the seal but be careful as it will slide out all on its own! Take your time and don't rush. It's not a difficult job but it is stressful working in such tight quarters with very limited space to maneuver so just step out of the boat if you get frustrated.
Great advice. Especially since i was getting impatient just disconnecting hoses this year! I would love to find a reliable shop somewhere nearby that i could trust but it doesn't seem to exist and i've never needed/wanted one till this job....I will just tackle it over several weekends and take it slow.