Quote Originally Posted by TXSurf4 View Post
It don't believe it needs to be raised for the wake makers kit as the point of the kit is to increase your displacement which should increase your "amplitude". Now that being said my amplitude bar is terrible. It has never really worked well as it seems like there is air trapped in it sometimes. I know I have read that it actually needs to "warm up" before it works well so maybe I need to pay attention to it later in my runs but there are times where I have a crew of 8-10 and are at full ballast (4,700 in water and 1k in lead) and the actual side of the bar is just pegged at the bottom. I don't worry about it to much any more as I have disabled the part of the autowake logic that uses it. You can read about that here in ragboy's post #89

https://forum.moomba.com/showthread....ghlight=ragboy

https://wake9.com/2021/07/01/2021-moomba-mojo-settings/




Mine varies as well, sometimes it shows nothing and other times is shows 100% which is why I feel like there might be air stuck in it a times.



Did you do the amplitude like that or the inclinometer? I have done my inclinometer like that and I know there is way to calibrate the draft sensor I just don't remember where I read it. If you come across that video can you share it?

I know people have been setting up boats for years with out all of the fancy tech we have now but when I hear that people don't use Autowake I always wonder why. I will admit it took me a little bit to sort it out and get it dialed, but after watching and reading a bunch of Ragboy's stuff on Youtube/Wake9 Autowake works amazing for me and my wave is so consistent. I love it.
You know what....it WAS the inclinometer I calibrated last summer! . Sorry! I gotta stop posting after a few drinks!!

Sent from my SM-G781V using Tapatalk