Page 2 of 9 FirstFirst 1234 ... LastLast
Results 11 to 20 of 83
  1. #11
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    I bet that will work better than you expect.
    My only issue doing the trans cover is if the adhesive does not hold well from moisture and/or heat and falls off. It basically lands on the prop shaft coupler of the V-drive and shreds apart or wraps around the shaft and causes damage. I know the dynamat type stuff is bonded and not coming off.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  2. #12
    Join Date
    May 2018
    Posts
    4,928

    Default

    Quote Originally Posted by Holdmybeer View Post
    I bet that will work better than you expect.
    My only issue doing the trans cover is if the adhesive does not hold well from moisture and/or heat and falls off. It basically lands on the prop shaft coupler of the V-drive and shreds apart or wraps around the shaft and causes damage. I know the dynamat type stuff is bonded and not coming off.
    Good point, but if this is typical closed or open cell foam, I don’t see it taking out a prop shaft, but it could make a shredded mess.

    I will try it on trans hatch and put a heat gun to it and see if adhesive fails.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  3. #13
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    Quote Originally Posted by larry_arizona View Post
    Good point, but if this is typical closed or open cell foam, I don’t see it taking out a prop shaft, but it could make a shredded mess.

    I will try it on trans hatch and put a heat gun to it and see if adhesive fails.


    Sent from my iPhone using Tapatalk
    Let us all know what you find out. The dynamat material did help with vibration created noises and removed some of the higher pitch whine. I would be willing to throw $50 at something that will take it down another notch.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  4. #14
    Join Date
    May 2018
    Posts
    4,928

    Default

    Quote Originally Posted by Holdmybeer View Post
    Let us all know what you find out. The dynamat material did help with vibration created noises and removed some of the higher pitch whine. I would be willing to throw $50 at something that will take it down another notch.
    Of course, I was only waiting to see what Supra ended up using.

    I should also have a couple more fall cruises to do an ear test before storage.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  5. #15
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,078

    Default

    Quote Originally Posted by larry_arizona View Post
    Of course, I was only waiting to see what Supra ended up using.

    I should also have a couple more fall cruises to do an ear test before storage.


    Sent from my iPhone using Tapatalk
    I'm going to find out too.

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  6. #16
    Join Date
    May 2018
    Posts
    4,928

    Default

    Foam showed up, started on trans cover.




    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  7. #17
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    Between that new foam and the surf pipe, should be nice and silent for surfing and music blasting.

    You going out on the lake to test it this weekend?
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  8. #18
    Join Date
    May 2018
    Posts
    4,928

    Default

    I hope to.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  9. #19
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,966

    Default

    Quote Originally Posted by larry_arizona View Post
    Foam showed up, started on trans cover.




    Sent from my iPhone using Tapatalk
    WOW! If that glue holds up, that has GOT to make a difference! Looks good too. People are gonna think you have an electric powered boat!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  10. #20
    Join Date
    May 2018
    Posts
    4,928

    Default 2022 Sound Proofing



    Main floor
    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •