Quote Originally Posted by SorryCharlie View Post
Redrilled holes and below is the result.
94C74A04-AF1B-4156-BC09-5CE083097E62.jpg

42FC0CAE-EB89-4328-A9E4-37769F94270A.jpg

Since I had to change the location of the actuator feet, I asked Rob what angle the tabs should be at when deployed? He said that 10-15 degrees is plenty, I am at 13 degrees at the current location. He said more important is making sure that the tabs can retract up.

Hopefully I’ll get the electrical in this week, that should be pretty strait forward.

As an aside, the holes from the removed block were weeping water, I guess water sits in those cavities below the floor all the time? And is nothing to worry about?
Those look good. For the price that might be a better option then other systems I have look at.

Does this system have a "Launch" mode? (Deploys both tabs to help get on plane)

As for the water, There shouldn't be much in there if you pull the drain each time. I know I have found water in spots of my boat because I didn't let it air out long enough, but I also didn't want the barn cats sleeping in my boat, so the cover went on anyway. Are you going to glass over the holes yourself, or have that done somewhere?