Quote Originally Posted by dakota4ce View Post
Would be interesting to see the software linked up to the 2.25 and a GSA plate. I think you need to do this!

If you can get auto level, launch, and good surf operation on the lenco 2.25s you would crack the code. All assuming the tabs don’t rip out of the glass when autoleveling.

I would also wonder if those little guys have the stink to move those big plates under pressure.


Sent from my iPhone using Tapatalk
Yeah the auto leveling may be an issue.
Instead of doing the logical and intelligent thing and deploying the correct tab slowly until the boat is level for some unknowable reason they programmed it to deploy to 40% immediately and then move from there to set the level.
At 30mph taking a gsa from 0-40% is probably not a good idea.

It can be turned off though.
I don't find it overly useful anyway as its not sensitive enough, it lets me ride around at +/- 1.5 degrees without making any changes. I prefer to just fill the ballast on the off side so it rides level.