Results 1 to 6 of 6
-
09-23-2019, 03:25 PM #1Junior Member
- Join Date
- Sep 2017
- Location
- North Carolina
- Posts
- 20
2017 Craz - Ballast line questions
I have an early 2017 Craz Surf Edition. About 2 years ago I ordered WakeMakers BagBusters 1140 lb read upgrade bags. At the time, they were "Universal Fit". They fit ok, but always had some issues at the front edge. Eventually one of the bags developed a leak so I replaced/upgrade to the now available "Exact Fit" model for the 2017. The problem is, it came with duel inlet and vent ports. My 2017 only has a single inlet and vent port in each locker. When I asked WakeMakers about this, they indicated that the 2017s came with the dual ports and that I must have an earlier version.
So the question I have is, did SC change the ballast design in the middle of the 2017 model year to switch from single hoses to dual hoses?
Is it possible to retrofit to the dual-hose design for those of us with the single-hose design?
Thanks
heath2017 Moomba Craz Surf Edition
High altitude prop
1140 lb WakeMakers Universal Fit rear ballast upgrade
Autowake 2.0 firmware upgrade (20171121 version)
2013 SeaDoo GTI135SE with ski mode
1984 SeaRay 210 CC - traded
-
09-23-2019, 03:27 PM #22017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
09-23-2019, 03:54 PM #3Junior Member
- Join Date
- Sep 2017
- Location
- North Carolina
- Posts
- 20
That's very good to know. I didn't realize that they changed the lines with just that setting. I just thought that it was the larger bags. What is the purpose of the dual lines in the pre-G6 models? It's not filling or draining any faster, and just seems to be one more thing to fail (connectors, lines, fittings, etc.).
At some point, it's still a single line to/from the pump and vent hole on the side, so where does it split/T in the case of the MAX?
chezdude2017 Moomba Craz Surf Edition
High altitude prop
1140 lb WakeMakers Universal Fit rear ballast upgrade
Autowake 2.0 firmware upgrade (20171121 version)
2013 SeaDoo GTI135SE with ski mode
1984 SeaRay 210 CC - traded
-
09-23-2019, 04:25 PM #4
-
09-23-2019, 05:05 PM #5Junior Member
- Join Date
- Sep 2017
- Location
- North Carolina
- Posts
- 20
2017 Moomba Craz Surf Edition
High altitude prop
1140 lb WakeMakers Universal Fit rear ballast upgrade
Autowake 2.0 firmware upgrade (20171121 version)
2013 SeaDoo GTI135SE with ski mode
1984 SeaRay 210 CC - traded
-
09-23-2019, 05:22 PM #62017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX