Results 1 to 9 of 9
-
09-19-2018, 06:59 PM #1
2008 LSV tracking fin help needed
front tracking fin is bent over flush with hull--is this thru bolted or just screwed in from the bottom--would like to know if the gas tank has to be removed -any advice would be appriciated if youve replaced one yourself
stacyHey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
09-24-2018, 08:24 AM #2
I cant answer your question since Ive never had to change one,but I would like to know how did you bend it over.Those fins are pretty strong!
jy
-
09-24-2018, 11:30 AM #3Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
I replaced them on my direct drive Supra last year (so there was no fuel tank in the way). They were fastened with flat head machine screws from the bottom and nylon lock nuts inside and glued with 3M 5200 (or some other really gnarly stuff). They have used the exact same casting for decades (my 1986 has the exact same part number fin as my 2018 ), so you should be able to order that part from Skier's choice.
SC part number: 102820
Last edited by korey; 09-24-2018 at 11:33 AM.
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
09-24-2018, 11:31 AM #4Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Haven't replaced one but I'm so it's thru bolted like the strut. You'll know as soon as you try removing the bolts they'll probably spin.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
09-26-2018, 03:28 AM #5Senior Member
- Join Date
- Aug 2015
- Location
- Spokane, WA
- Posts
- 262
They are thru-hull bolted. You’ll have to pull the fuel tank, which is actually quite simple. It’s also a good opportunity to scrub the bilge while it’s out.
Unscrew the two floor panels, pull up. Disconnect the fuel hoses and the tank will lift right out. You probably want to syphon out the fuel first.
It’s an easy job!
Sent from my iPhone using Tapatalk Pro2008 Moomba Mobius LSV
-
10-02-2018, 11:57 AM #6
thanks for the heads up on being thrubolted--figured it was but hopefull that the gas tank did not need to be pulled
the owners are not sure how it happened-friends of mine who bought my old boat. they think there kid did it when he was out on it. something about a keg being used as balast.......Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
10-02-2018, 03:13 PM #7
-
10-02-2018, 03:25 PM #8
-
10-03-2018, 01:34 PM #9
Well, you can't exactly recycle the beer back into the keg.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!