AutoWake questions

[goose]

Matt,

I have two questions related to my 2017 Mojo Surf Pro.
1. What is the current software and is there a link to download the latest software
2. Need some advice on checking the Inclinometer on the boat and how to recalibrate the meter
a. I have read the earlier post on setting the roll but I’m a little concerned that the pitch may be off
b. Is the floor consider level point in the boat that I can use to check the pitch and roll with a digital level?
Love the boat

Sorry about delay on some of these posts lately. We are in the busy season working on 2019 so haven't had much time to respond.

On this question, you can email me and I can send you a link to the latest software. There are also other guys on here that have it and if you send them messages, they can send it to you also. It is really easy to download and install and I think you will really like the improvements.

As to your inclinometer, I first recommend you install the latest software. Once you have it, then you can recalibrate pitch and roll independent of each other. The easiest way to calibrate roll, is to run the boat at wakeboard speeds. It is really easy to see when the wakes are completely symmetrical, and once they are, then you can recalibrate roll to zero. On pitch, it is not quite as easy. You can get the boat on the trailer and get the floor level, but unfortunately, the boat does not actually sit perfectly level relative to the water. All our testing has been relative to the boat sitting in the water, with only 1 passenger standing in the walkway with no additional ballast. The easiest way to do that is sometime when you have trailered the boat to the lake, when the boat is first put in the water, recalibrate pitch to zero before adding ballast or passengers. Once you have it calibrated correctly, you never have to recalibrate, even if you reinstall software.

Hope that helps. I will try to go back and answer the other questions shortly....