Quote Originally Posted by viking View Post
Was going to plasti some trim on momma's ride. How long do you let it cure before you peel off the overspray? Going to search some youtube vids but saw the thread revival and thought I'd ask since you did your boat logo Mike.
Thanks!
I generally wait about 1 hour, in 20 minutes the plasti should have a dull color so its dry to the touch and you can start peeling, but I like to wait about an hour to let it cure a bit more. If you wait too long the over spray starts getting hard to remove.

I like to put 3-5 thin coats, each coat I let dry till its dull in color.

I like to use rubbing alcohol to clean the over spray if it doesn't come off all the way.

Also I still tape it off to keep the over-spray controlled but I do let it over spray as the instruction say.