Moomba Flow Surf Available for 2006 and Newer LSVs

[jstenger]

Just had the "Flow" installed on my 08 LSV. Be aware that the older swim platform will not fit once you have the flow installed. I had to push it out about an inch to get it on the boat, even after doing this the Flow is not able to be place in the "Stored" position.

Testing out the flow, no pictures yet, and ended up getting squirrelly water off the platform. It appears to lengthen the wave, but will need to surf it to know for sure. Had ~700 at the bow, and ~600 in each rear bag.

Currently have a new swim platform on order, so add the cost of a new swim platform to the cost of the flow if you are installing on an older LSV.

Attachment 20342
Attachment 20343
Attachment 20344

Can you please post a pic from inside the rear locker showing what the hardware looks like on the inside if there is any? Thanks.

[ninedriver]

Just had the "Flow" installed on my 08 LSV. Be aware that the older swim platform will not fit once you have the flow installed. I had to push it out about an inch to get it on the boat, even after doing this the Flow is not able to be place in the "Stored" position.

Testing out the flow, no pictures yet, and ended up getting squirrelly water off the platform. It appears to lengthen the wave, but will need to surf it to know for sure. Had ~700 at the bow, and ~600 in each rear bag.

Currently have a new swim platform on order, so add the cost of a new swim platform to the cost of the flow if you are installing on an older LSV.

Attachment 20342
Attachment 20343
Attachment 20344

Just curious, but if you removed the little handle from the flow "blade" will it clear the swim platform? Looks like it could still be operated by pinching the "blade" to move it.

[mikenehrkorn]

Too bad the handle isn't removable, that would be a simple solution.

Anybody hear if the Flow is available for the OBV yet?

[MI-LSV]

Here is the pic from in the rear locker.

Only has two nuts that are exposed.

image.jpg

[MI-LSV]

The handle can be removed, and would be able to fold up. Looked at doing this, but did not find a suitable replacement yet.

[jstenger]

Here is the pic from in the rear locker.

Only has two nuts that are exposed.

image.jpg

Thanks for the pic. How is the FLOW working out?

[mikenehrkorn]

Here is the pic from in the rear locker.

Only has two nuts that are exposed.

image.jpg

Are there only two bolts holding it on or are there 4 and the other two are below the locker level?

[jstenger]

The handle can be removed, and would be able to fold up. Looked at doing this, but did not find a suitable replacement yet.

We need surf pics and a review!!!!!!!!!!!

[nitrodude24]

Yes we do!!

[jstenger]

Take a look at the LSV Flow. They added another spring pin on the bottom and more holes in the plate. Looks like more than just 3 settings now. I had heard that it really changes the wave when it is spun all the way around to the bottom. More of a bottom effect than a side effect.