Results 81 to 90 of 197
Thread: Mojo Surf Ballast Setup
-
06-24-2013, 11:04 AM #81Member
- Join Date
- Jun 2013
- Posts
- 30
Don't worry I don't work for a chocolate factory or a bank
2012 Moomba Mojo 2.5
2x1100lbs, 370lbs, center hard tank+IBS
ACME 1235 prop
Wakeboard Hyperlite Belmont
Wakeskate Hyperlite Byerly
Wakesurf Hyperlite Broadcast 5.4
-
06-24-2013, 11:10 AM #82
Must be a ski instructor or guard the Pope or something.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-24-2013, 12:23 PM #83Member
- Join Date
- Jun 2013
- Posts
- 30
Pope guard haha funny! you forgot watchmaker. I work for swiss air navigation services as a technical supervisor (something like FAA in the U.S)
2012 Moomba Mojo 2.5
2x1100lbs, 370lbs, center hard tank+IBS
ACME 1235 prop
Wakeboard Hyperlite Belmont
Wakeskate Hyperlite Byerly
Wakesurf Hyperlite Broadcast 5.4
-
06-24-2013, 12:52 PM #84
gurt,
I wasn't following all the Swiss stuff. Wish I would have known as the Swiss Wakesurf Championship was just held a few days ago. Some of the best women riders in the world were there including Rebecca Ort & Raleigh Hager. It's a stop my family hopes to make it to in the next 2 yrs.
-
06-24-2013, 01:30 PM #85Member
- Join Date
- Jun 2013
- Posts
- 30
ok, I didn't know about this championship. I posted a picture (it as to be checked by moderator) of your ballast setup that I've done (like yours) but a bit more detailed (to be sure that I understood it well).
Last edited by gurt; 06-24-2013 at 01:40 PM.
2012 Moomba Mojo 2.5
2x1100lbs, 370lbs, center hard tank+IBS
ACME 1235 prop
Wakeboard Hyperlite Belmont
Wakeskate Hyperlite Byerly
Wakesurf Hyperlite Broadcast 5.4
-
06-24-2013, 01:43 PM #86
Post approved.
Dang it, can't believe I forgot about watchmaking and the army knives.My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-24-2013, 02:31 PM #87Member
- Join Date
- Jun 2013
- Posts
- 30
cheesemaker...
Maybe the hose between the 370 vent and the left 1100 can be 1" because it's used to fill ?2012 Moomba Mojo 2.5
2x1100lbs, 370lbs, center hard tank+IBS
ACME 1235 prop
Wakeboard Hyperlite Belmont
Wakeskate Hyperlite Byerly
Wakesurf Hyperlite Broadcast 5.4
-
06-24-2013, 04:22 PM #88
yes, you could actually upgrade all the vent lines to 1" while you're at it. factory has done this for '13 and going forward with the thought that if you're pumping water in thru a 1" then you should be venting with 1" to avoid any issues.
-
06-25-2013, 03:55 AM #89Member
- Join Date
- Jun 2013
- Posts
- 30
Ok, thanks for info (it seems to be logic to have the same section everywhere). So my schematic is correct ?
The TH off the boat are ok for the 1" or do I have to replace them ?
Thanks2012 Moomba Mojo 2.5
2x1100lbs, 370lbs, center hard tank+IBS
ACME 1235 prop
Wakeboard Hyperlite Belmont
Wakeskate Hyperlite Byerly
Wakesurf Hyperlite Broadcast 5.4
-
06-25-2013, 05:08 AM #90Member
- Join Date
- Jun 2013
- Posts
- 30
I checked everything and my order is placed (I took some TH 1" in case I have to replace the stock one's) and hope I forgot nothing ! (I always took one extra items of each except the bags ). Just have to wait now...
Thanks for your help guys ! to be continued...2012 Moomba Mojo 2.5
2x1100lbs, 370lbs, center hard tank+IBS
ACME 1235 prop
Wakeboard Hyperlite Belmont
Wakeskate Hyperlite Byerly
Wakesurf Hyperlite Broadcast 5.4