Results 11 to 20 of 25
Thread: New water impeller
-
05-24-2013, 10:25 AM #11
He's probably working on his wakeboarding while the rest of us sit in the glow of LCD screens. At least that's what it looks like from pics I've seen.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
05-24-2013, 10:25 AM #12
-
05-24-2013, 01:41 PM #13
So I will ask, how the hell do you get to the back of the engine on a vdrive? It seems that only a small monkey could get down there and replace the impeller on a 2003 LSV.
2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
05-24-2013, 01:48 PM #14
On the '06 up the side panels swing down. Very easy to reach just about everything, especially when the exhaust manifolds are cool. When they are not-- not so much.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
05-24-2013, 02:54 PM #15
If folks have ideas on the 03 I would appreciate it. It seems impossible
2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
05-24-2013, 03:30 PM #16
hire a small monkey
-
05-24-2013, 03:51 PM #17Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Just did mine, removed the side panel, blower, and then the pump....Sounds like a lot but really only 4 bolts and 2 hoses..
https://forum.moomba.com/showthread....5648#post35648http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-24-2013, 04:10 PM #18
New water impeller
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
05-25-2013, 08:04 AM #19Banned
- Join Date
- Oct 2005
- Location
- Durham, NC
- Posts
- 649
Okay, I am confused about the petroleum products warning. When I winterize my boat and remove the impeller, I cost in it petroleum jelly and store in a Ziploc bag. This warning (and the posts above) warn against that. I was curious where I got my info, and here it is...
Indmar Owner's Manual; Page 7-3; "3. Remove the raw water pump impeller... Lubricate the impeller with Vaseline and seal in an airtight bag."
WTF?!?!
-
05-25-2013, 10:06 AM #20
The 2012 indmar manual states the same,and ive been doing this for three years now with the same impeller that has over 300 hours on it and it still looks good .
So why not use it.
Or people aren't lubricating it there drowning it
(Lubricate the impeller with Vaseline and seal in an airtight bag.")2012 Mobius LSV
05 Outback LS SOLD