Results 1 to 9 of 9
Thread: Black mold spot removal
-
04-02-2013, 10:53 AM #1
Black mold spot removal
So trying to get ready to go out for the first time this year. The black seems to have broken out it a black mold spot rash.
Anyone have tips to remove these spots?
Any ways to help prevent further out brakes?2011 Xlv with 325hp and stock Gravity lll
-
04-02-2013, 11:20 AM #2
Try other mild cleaners first. But, if you have to go harsh, use "Totally Awesome" from the Dollar Tree and a magic eraser. Be careful as the magic eraser is abrasive. Be sure to follow up with some 303 protectant.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-02-2013, 09:34 PM #3
thanks ill try that. which 303 are u talkin about
2011 Xlv with 325hp and stock Gravity lll
-
04-03-2013, 07:31 AM #4
mild cleaner and then park it in the sun for a few days
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
04-03-2013, 11:25 AM #5
I get this at Boat US but I think you can order it from Wally's with free shipping to store if they don't have it:
http://www.303products.com/303r-aero...tant-32oz.htmlMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-04-2013, 11:51 AM #6
Thank ill clean it agin park it in the sun then hit it with 303 protectant
2011 Xlv with 325hp and stock Gravity lll
-
04-04-2013, 11:09 PM #7
I wonder how a steamer would work for something like this? I would think for sure it would kill off the mold spores, but you might still be left with the black mark that requires a cleaner anyways. I think it would be safe for carpet, but the heat may crack vinyl depending on where you have it.
If you got one, give it a try. Be sure to dry in the sun afterwards since you are still adding moisture that surrounding carpet would pick up and any remaining spores would thrive on.2013 Mobius LSV
2004 Centurion T5
-
04-05-2013, 09:01 AM #8Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
I have had great success with Starbrite Mildew Stain Remover. Follow the directions, it seems to work fine that way. Follow up with a vinyl dressing like 303.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
04-08-2013, 02:40 PM #9
This may be a little extreme, but I had some bad spots on my yellow sections a few years ago. They looked purple and no amount of scrubbing or chemicals on the surface seemed to get them out. I got some very tiny needle syringes from the medical clinic I used to visit, did a 50/50 mix of water and bleach, and then injected it into the spots on the cushion. I held the needle at an angle almost parallel to the surface, if that makes sense, to avoid having a pin hole show. Did 3 or 4 spots and it actually worked pretty good and didn't get brittle. I figured I'd rather have a slightly lighter spot (bleached) than a dark spot showing.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...