Quote Originally Posted by brain_rinse View Post
We're talking thousandths of an inch so I would expect that to transfer to the prop shaft and couplers. It would be an easy test though... rdlangston do you still have a .017 gap when you tighten up your couplers to spec?
Well, I know mine are torqued to 30 and there is a gap all around between the couplers from about .003" to .007" if I remember correctly.

Quote Originally Posted by rdlangston13 View Post
not sure. and mine is not torqued exactly to 30 ftlbs, i dont see how yall get a torque wrench on there. i had hell with two box wrench. i didnt really crank on it and the rachet i used was only 1 foot or so long and i dont think i put more than 30 lbs of force on it.
yeah, it's a little tricky but it can be done. You have to rotate the coupler to get the bolts in just the right place.