Quote Originally Posted by SONIC View Post
Yeah as you know a small movement in the actuator mount can have a large effect on the deployment, looks like on your small tabs about an inch of placement difference yielded 18 degrees of change.
Through a lot of trial and error on placement for both ends i was able to get the extension and retraction that I wanted with the 2.5" actuator.
It would have been easier with the 4.5" version but I wanted to give the bennetts a try and they don't have the long throw versions.
Would be interesting to see the software linked up to the 2.25 and a GSA plate. I think you need to do this!

If you can get auto level, launch, and good surf operation on the lenco 2.25s you would crack the code. All assuming the tabs don’t rip out of the glass when autoleveling.

I would also wonder if those little guys have the stink to move those big plates under pressure.


Sent from my iPhone using Tapatalk