AutoWake questions

[goose]

Goose,

2017 Mojo with current software. No draft sensor. Amp setting at 100.

After surfing with rear ballasts at 100% (or as close as autowake allows) I want to take a wakeboard set.

I manually drain the rear ballast to 50% and turn on autowake for wakeboarding.

Is autowake going to fill those rear bags?

Sent from my SM-N950U using Tapatalk

Short answer is the rear ballast levels are tied to amplitude with most recent software. So if you want to wakeboard with approximately 50% rear ballast, then just change amplitude to 50. It will achieve desired roll first, then drain to achieve average rear ballast of 50%. Front ballast adjusts to achieve pitch.

Sent from my SM-G930V using Tapatalk