FAE Install Pics

[corvette8189]

Posted on the Facebook Page and figured id post it here as well.
I'm a dealer for FAE so if you have any questions or would like to purchase one just send me a message.

Start off with removing the stock flapper and 4 screws that hold the through hull connection together.


Then undo the 2 clamps on the inside


Next takes some patience to get the through hole connection off. I used the debond I got with the install kit and a putty knife to help get it loose then used the shims and a mallet. Grabbed it with some pliers and moved it left, right, up, and down and hit the shims in more.