Results 21 to 30 of 149
Thread: FAE Install Pics
-
04-10-2018, 02:49 PM #21
From FAE
WILL FAE INTERFERE WITH MY BOAT WARRANTY?
There are thousands of FAE installed. We are not aware of anyone having a warranty issue with FAE. If your boat engine is under warranty you can have your boat dealer perform the FAE installation to eliminate any warranty questions.FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
04-13-2018, 06:43 AM #22
I’m still on the fence. Had it on my last Supra but of course it was out of warranty. I guess if I order the factory fae that should not void anything. I’m sure removing the baffle they could use to void warranty on certain issues. Just don’t want to ruin a 7 year warranty.
-
04-13-2018, 09:00 AM #23Member
- Join Date
- Sep 2017
- Location
- Memphis, TN
- Posts
- 81
Great write up!
2016 Moomba Helix
Brittany Blue and Gunmetal Flake
Full Wetsounds Upgrade
1100 FatSacs
-
08-17-2018, 05:03 PM #24
Thanks
Anybody looking at getting one, send me a PM for discount.FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
08-18-2018, 07:39 PM #25
-
08-21-2018, 04:53 PM #26Senior Member
- Join Date
- Aug 2015
- Location
- Spokane, WA
- Posts
- 262
-
03-27-2020, 11:06 PM #27Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Hey guys,
Billy hooked me up and these instructions are great. I got all the holes drilled and ready to mount tomorrow.
I am curious of people attach the flexible hose after the mount is completed or as you are inserting the FAE and mounting it? Reason I ask is that it is pretty tight in there and the hose is pretty darn stiff.
Let me know guys!2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
03-28-2020, 06:02 PM #28
-
03-30-2020, 08:45 AM #29Junior Member
- Join Date
- Sep 2017
- Location
- North Carolina
- Posts
- 20
With the FAE having that long of a moment arm and going down into the water behind the center plate, I’d think that would be a lot of force exerted on it. In particular those welds where the pipe connects to the through-hull flange. Any effect on the wave with the pipe sitting asymmetrically off the back of the boat?
Is this FAE in the same design as the factory? I thought the factory kept it closer to the hull (between the center and port plates).2017 Moomba Craz Surf Edition
High altitude prop
1140 lb WakeMakers Universal Fit rear ballast upgrade
Autowake 2.0 firmware upgrade (20171121 version)
2013 SeaDoo GTI135SE with ski mode
1984 SeaRay 210 CC - traded
-
03-30-2020, 05:13 PM #30Senior Member
- Join Date
- Jun 2016
- Posts
- 289
2 Questions:
1. Do I need debond? I have read a lot of mixed reviews, and have read where goof off has worked.
2. I am planning on taking a saws all and cutting out my baffe vs buying a new one, is that doable or should i just buy a new one?
Thanks!!2019 MAX
2015 Mobius LSV Surf Edition (SOLD)
2001 Supra Sunsport SSV- SOLD
2017 Ram 2500 Crew Cummins 6.7L