Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Join Date
    Dec 2015
    Location
    north texas
    Posts
    1,164

    Default

    Solid advice above. The stereo gets used pretty much entire time boat is in use. A good quality system will change the boating experience.


    Sent from my iPhone using Tapatalk
    2017 Supra SA

  2. #12
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,217

    Default

    Check your stereo wire guage. I ran all new wire b/c the previous boat was a 2007. The tower was not that bad since the existing wires were in place.

    I also ran RGB wire for the add'l lights, speaker grills, and cup holders.
    2018 Supra SL400

  3. #13
    Join Date
    Aug 2017
    Posts
    3

    Default

    The tower is already wired with 16ga wires. I haven't look the space I have to rewire with larger gauge (and the work involved).

    BTW, for those of you that have the S-bend tower and used the factory mounting points, what spacer do I need? I've seen 1/2 inch. Is that exact ?

  4. #14
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,361

    Default

    Quote Originally Posted by hguerard View Post
    The tower is already wired with 16ga wires. I haven't look the space I have to rewire with larger gauge (and the work involved).

    BTW, for those of you that have the S-bend tower and used the factory mounting points, what spacer do I need? I've seen 1/2 inch. Is that exact ?
    Wish I could tell you but the Rev8 were installed when I purchased the boat.

    Exile makes mounts that fit the S-Bend but they are made specifically for Exile speakers. I'm sure they could be modified to fit another brand.
    Wet Sounds might have something similar but not on the website.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •