Results 31 to 40 of 44
Thread: Mojo engine tray
-
06-29-2019, 06:24 PM #31Junior Member
- Join Date
- May 2019
- Posts
- 4
I purchased a tray from the dealer that fits the 2019 Mojo. I'll post pictures of it when it comes in.
-
06-29-2019, 08:37 PM #32Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
The question is then, which tray (part number) did you order?
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE
-
06-30-2019, 09:55 AM #33
-
06-30-2019, 07:34 PM #34
The part number is in the second post of this topic
Sent from my iPhone using Tapatalk2015 Mojo
2005 Yamaha at-230 sold
2012 Ram 2500 tow rig
-
08-09-2019, 10:21 PM #35
Does anyone have a good dealer to buy from? Mine won't get back to me?
2016 Mojo
2010 Moomba LSV-Sold
-
08-10-2019, 06:45 AM #36David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
07-22-2022, 02:30 PM #37
-
07-22-2022, 02:51 PM #38
So I bought the same one for my 2015. The newer boats use 2 struts to hold the engine cover up. My 2015 uses a single strut mounted to the front. I just removed the strut from the quick disconnect and cut a slot in the plastic tray so it would fit over the mount. Then reattached the strut. They are quick disconnect strut ends so very simple.
You could replace the single unit with duals like the newer boats but the tray is already $200 and I didn't see the need. As for you 2014, if the hull for it is the same as 2015 I know it fits the hole.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
05-26-2023, 02:10 PM #39
Ordered mine today - wow they have gone up! $272 from local dealer. I will be the first 2014 fitting one but if measurements are correct that I see in this thread it will fit just fine.
2023 Moomba Max
1,345 WM Rear| 860 WM Bow bag's + 800lbs lead = 6,350lbs | Prop-3591
2014 Moomba Mojo 2.5- SOLD
Tow- 2002 F-350 Super Duty 7.3L PSD
-
05-26-2023, 05:40 PM #40
It will fit jist fine. You only have a single strut verses the double strut of the newer boats. You can either cut a groove in the front and make it fit around strut mount OR change to a dual strut setup.
Whichever you chose make it easy to remove. You cannot do any maintenance items with it installed.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow