Results 1 to 10 of 55

Threaded View

  1. #33
    Join Date
    Sep 2012
    Vidalia, GA/Lake Oconee



    I replaced the Oil Sensing (sending??) unit. I didn't know what the oil pressure switch was until you told me. The wires at the switch had been spliced together to bypass the switch ever since I bought the boat and has been running like that for eleven years.

    I looked for one just like the one on the boat (pic attached). I didn't see one like it on the Napa site but I guess it doesn't have to look the same (???). I should just change the wire connectors to fit over the one post??

    In another post R98ROO said something about a violet wire running to a kill switch. Do you know what and where that is?
    Last edited by Bend; 05-28-2013 at 08:12 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts