Results 1 to 8 of 8
Thread: RGB Lighting/Wetsounds REVO-6
-
04-23-2020, 10:01 AM #1Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
RGB Lighting/Wetsounds REVO-6
I am about to dive into some audio upgrades on my Craz that (i think) will include replacing all of the factory in-boats with WS REVO-6's. I wasn;t really shopping for something with LED lights, but it seems like everything nice has them now. So I might as well use them.
Since there is a blue LED lit MOOMBA logo between the speakers, I'm not so interested in actual RGB control - just matching blue. Do i need a controller to light the speakers BLUE ONLY? That would mean that the LEDs in the speakers are internally regulated and I can just throw 12v on the blue wire and ground on black. Or would they burn up?2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
04-23-2020, 10:07 AM #2
You do not need an RGB controller for single color RED, GREEN, BLUE, WHITE, PURPLE or AMBER color.
I can just throw 12v on the blue wire and ground on black.
-
04-23-2020, 10:28 AM #3Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
Derp, should have just Google the manual before posting... nevertheless"
"The RGB LED 4 wire harness should be connected with BLACK on +12V (a 2A inline fuse is required to be added). The other 3 wires (RED, BLUE & GREEN) can be combined & connected to ground (-12V) in a variety of combinations to achieve one color of illumination behind the tweeter cup. For instance – grounding RED & BLUE together will result in purple color."
http://www.wetsounds.net/media/produ...ies-Manual.pdf
Sent from my SM-G973U using Tapatalk2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
04-23-2020, 11:57 AM #4Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
My revo 6.5's are coming today. I was also wondering about the led option. I have found 2 crimp connectors with one end ready to accept new wire. It's beside every speaker wire connection and I assume this is for the led option (prewired) . thats where I'm going to hook the led wire to start anyway...
'18 mojo
-
04-23-2020, 10:47 PM #5Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
Just installed the revo 6.5's. They are a great improvement! I have them hooked to the factory amp kicker 800.5. I was concerned that I would need more power to tell a difference but this is not the case! The quality of sound is much better. They make the stock kicker speakers sound cheap. They seem to punch above their weight. Every aspect of sound the produce is better. I hooked the led wires up to the 2 open ended connectors I thought were the led connectors and I got nothing. There is a good chance I got the wiires backwards but haven't had a chance to investigate further.
'18 mojo
-
04-24-2020, 08:36 AM #6
Marine illumination circuits are typically blue
-
04-24-2020, 09:35 AM #7Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
-
04-24-2020, 10:08 AM #8