my 08 LSV mods

[brain_rinse]

Here are a few pics of the integrated bow sac. This thing fits like a glove and will add a few hundred much needed pounds up front. One of the T1200's fills it from the top of one of the legs. 2 T800s to drain it, one at the bottom of each leg. I added a new thru hull to each side. The center/top port I used to vent and tied into one of the drain lines (not pictured.)

I also added a switch which just required modifying the factory panel and enlarging the fiberglass cutout behind it a bit. I'm still waiting on the switch face to match the other 3 and it will all be looking factory.

One other thing worth mentioning... The drain holes on the bottom of my cupholders were sharp! I cut them off and ground it smooth.