Installing Exile's LSV Subwoofer Enclosure Video

[Brianinpdx]

Hey Johnny - Hopefully it went out last week. I'll be at the office Sunday and will check and get you a tracker. you should have it this upcoming week. Plumb a speaker cable and you've got yourself a 15 min plug and play deal.

-Brian

oh wait. ups lost it? ok, thats a bad joke! (was reading on the supra forum)

[Razzman]

I can throw on a thong and do an install video for ya! It'd be my pleasure!

Yewwwww!

[kaneboats]

That video'll be selling like hotcakes on ebay before you know it.

[dru1974]

so they will send that box out, what is the price, will they ship it to Canada and finally how much foot room remains?

[Brianinpdx]

Dru -

Yes, the LSV box is complete. It's about a week turnaround to get them out the door as its a custom enclosure and 100% hand assembled.

Shipping to Canuck land shouldnt be a problem. Shoot me an email to: [email protected] and we'll cost out shipping etc. I'll need a postal code.

Cheers!

[dru1974]

Will do thanx brian

[cab13367]

I just wanted to correct my post on page 1 of this thread - I slid the enclosure over the seat base with the sub hole facing to port, not to starboard. Just in case someone decided to try and duplicate my method. I corrected my initial post as well.

[cab13367]

I've been meaning to post these pics for a while now. The sequence below shows how you can slide the Exile sub enclosure in without removing the seat. This is on an 06 - the seats are different for the newer boats so this method may not work for all LSV's.

[offaxis82]

The 2005 LSV had a lot lower freeboard, does Exile make a version of this that'll fit the '05 hull design?

[Brianinpdx]

axis - Yup. got you covered. Shoot me an email to [email protected] and I can layout some options for you. The Exile enclosures vary from boat model year so they fit your boat correctly.

-Brian
Exile Audio