my 08 LSV mods

[brain_rinse]

Well it took a lot longer to get to this point than I had planned. After cutting the 1" NPS threaded thru hulls to length, installing, and letting the adhesive cure, I found that the ball valve would not thread on to them correctly. What I thought I bought from wakemakers was a ball valve with NPS on the intake side and NPT on the output. But in reality they were NPT on both sides and the NPS/NPT valves were no longer available.

Wakemakers was great though and located some thru hulls with combination threads... NPS threaded with NPT on the end. They sent the new thru hulls free of charge, I just had to remove the old ones and do the process over again.

Visually nothing has changed from the pics I posted earlier. And here is a pic of one of the thru hulls with ball valve and tee installed. Next up is getting the pumps mounted once the adhesive sets up.