![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Has anyone taken off their alternator? There is a bushing on the front side of it that isnt letting me slide it out of the bracket. How does that bushing come out? It cant go through the back side (it is treaded).
~08 Supra 24ssv Gravity Games~
All right. I'm liking her better by the day.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
X2 KaneNever done one on an Indmar but in the automotive world those bushings float in and out. Spray a little WD-40 on it see if it wiggles out.
2007 Mobius LSV
My dad is a mechanic and he said that it was installed backwards... My man is pulling his hair out.
~08 Supra 24ssv Gravity Games~
If a hammer doesn't work, then go for the plasma cutter. I've been wanting to have a project that would require me to buy one.
Oh yeah, after that, take is to someone who knows a lot more than I do to fix everything that I have recommended.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
Gravity, I just replaced mine last year, took all of about an hour or so. I don't remember that bushing being an issue. I'll take a look at my old one tomorrow and see if I can tell you anything from that.
We only fear what we don't understand...
00 Mobius V, PP, 2200lbs ballast, 3 amps, 12" sub, Alpine CD/MP3
That bushing is just be a sleeve for the alt bolt to go through so the alt doesnt wobble, mainly used because the hole on the alt is larger than the bolt itself. When the bolt is tight it will be tight against the alt. It sounds like its just stuck in the bracket. Can you stick a screwdriver or something between the bracket and alt to pry on the alt a little??
It will not be threaded.