Results 1 to 4 of 4
Thread: Vibration
-
03-10-2010, 02:41 PM #1
Member
- Join Date
- May 2009
- Location
- sun city, az
- Posts
- 33
Vibration
I have a 07 LSV and I am getting a lot of vibration in the steering. Anyone know why this is happening? I don't think my steering cable is bad, but I do know that I have a chipped OJ prop, but it was never this bad before. Getting a new ACME prop before summer.
-
03-10-2010, 10:10 PM #2
Senior Member
- Join Date
- Jul 2002
- Location
- London Ontario Canada
- Posts
- 2,264
check your alignment , see if there is any lateral/horizontal play in your prop shaft. Your prop is out of balance...like a car tire ,things don't get better with time
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
03-10-2010, 11:13 PM #3
Senior Member
- Join Date
- Jun 2007
- Location
- Calgary Alta Canada
- Posts
- 926
Doesn't take much ,a chip/ding bent blade,you name it . Sounds mostly like a prop issue.Alignment could be out as well from the above as well.
-
03-11-2010, 01:33 AM #4
Super Moderator
- Join Date
- Jan 2008
- Location
- Tallahassee, FL
- Posts
- 14,071
I hope it's just your prop. You'll know soon enough. Sometimes a strike can do more than just nick a prop. Sometimes it's just alignment, but there could be damage to the shaft or just a slight bend in the strut. If you notice it after the new prop you will have to get it checked out.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
Reply With Quote