Results 31 to 34 of 34
Thread: HELP, engine running HOT!
-
06-22-2009, 08:23 AM #31
Well, got mine on the water today with the new thermostat and I am back in business, engine cooling is back to normal.
Now, I just need to find the loose connection going to the Oil Pressure Switch/Sensor, can someone tell me which side of the engine this is located?
Thanks for all your help guys!
-
06-22-2009, 08:55 AM #32
Glad to hear you're up and running again.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-22-2009, 12:57 PM #33
I've had a lot of trouble with my thermostat on the same engine (replaced it 3 times) but, when it goes it opens up meaning you cannot get the engine to heat up b/c cold water keeps rushing through the water jackets.
check with the folks at Discount Inboard marine, LLC (http://www.skidim.com/) -- they are awesome.
Good luckLast edited by LSV_Flying; 06-22-2009 at 01:01 PM.
-
06-23-2009, 08:25 AM #34Member
- Join Date
- Mar 2009
- Posts
- 32
I took the water pump off and it looked good. The thing is pretty simple, it's like an impeller but has a metal cage on it. It appeared to be fine. Not sure where to go from here. Maybe I'll just make sure all the lines are clear. Hopefully I can figure this out before the season is over.