New Ballast system

[tazz3069]

OK here is the list and pictures.
www.firstchoicemarine.com Attwood Tsunami 1200GPH Pump $34.99 each. Treaded to barb straight $6.99. (this is the piece that fits the Tsunami pump. It is 1 1/8") Remote Mounting Bracket $2.99 each
www.boaterworld.com Bronze Strainer X-Hull w/Nut 1" $33.99 each. 3M 5200 Adhesive Sealant $14.99 each. 1" Hose Bard to a 3/4" thread $2.29 each

Local Hardware Store. 1" Street 90 degree Brass Connector $9.55 each. 1" Ball Valve $19.95 each. 1"MIP x 1" Barb $.65 each. #10 Hose Clamps $1.40 each. 3/4" PVC threaded couplings $3.90 each. 1" RVT tubing $2.91

Lots of patience, time, and a good game plan. Remember. measure 20 times and drill once. I put all of them together to see where is the best location for the intake and were everything will fit. I did use a carbide hole saw to drill through the fiberglass. Here are the pictures I promised.



I had to heat up the tubing over the stove. This allowed me to slip it over the 1 1/8" barb.

I used the existing hole for this application. This was the easy one to do. The other was a bit difficult to place and especially to drill