Hi I have a 2015 Moomba Mondo, had it since day one. I just took it out of storage, went to start it up (started) and the dash was displaying this with a yellow blinking light at the left button of the display. All of the toggles light up but the fill bags or blower will not power up.
I did a hard reset on the boat (powered everything off), checked all of the breakers, all were good, unplugged all the harnesses to the back of the display, (even to the ECM), put everything back in and I still get this code and yellow blinking light on the left button. The error message comes up when I press the yellow blinking button.
If anyone has had this happen or knows what it is let me know for me to haul it into the dealer is a 3 1/2 hour drive and I’m trying to avoid that.
That looks like a bad display. Dealer might be able to reflash but that is a gamble.
2015 Moomba Mojo Surf Edition - SOLD
4,000lbs
Manual Flow
2025 Mojo - Incoming
That's a new one on me. I would say trying to reload the latest software that a 2015 model can handle via a USB drive if you can get a copy.
Sent from my SM-S721U using Tapatalk
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
Update:
Took the boat into the dealer. After a scan it was determined the display required an update and an update of the ECM at the motor. Service tech said anytime the screen displays the error code from above the boat must be brought in for an update. He said 3-4 a year come in for this fix.