Results 1 to 5 of 5
  1. #1
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,779

    Default shredded impeller.....what next?

    So we got on the water the other day and almost immediatley got a warning about engine temp. shut it down and decided to pull the impeller and check it. Sure enough it was destroyed. Only 2 yrs old. Luckily I keep an extra onboard so we were back in business in less than 30 minutes and the boat ran great for the 2 days on the lake after. The real question is what about all the bits and pieces that came off? do I need to remove all the oil cooler or heat exchanger hoses to see if they are stuck there? What do you guys think? I've never had this happen in 30 yrs of boating LOL. Raptor 6.2 400 engine on a 2021 Craz
    Attached Images Attached Images
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  2. #2
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,438

    Default

    By now everything is most likely in the lake and gone. Just watch your temps and you are probably fine.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  3. #3
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,779

    Default

    thanks, I talked to the mechanic at the dealer and he basically said the same thing. We had 2 full days on the lake after this with no issues so I feel pretty good leaving things as is and watching the temp like you said.
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  4. #4
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    2,151

    Default

    Yep. Happened to me several years ago with a different boat than I have now. I was worried too, but never had any issues. If any bigger pieces got stuck, they will break down and pass on through. If no temperature issues, then no temperature issues, and no problem!

    Sent from my SM-S721U using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  5. #5
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    2,151

    Default

    By the way, you're floor and boat color looks just like mine.

    Sent from my SM-S721U using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •