Autowake showing bags full when actually empty

[SSurfer321]

So I finally got my boat in the water over the 4th of July. I put it in and it fired without issue, except for one.

The 11" screen shows my bow ballast bag as full. It is completely empty. I can try to fill it but Autowake keeps shutting it off.

Anyone else come across a similar problem? Possible solutions?

[Holdmybeer]

So I finally got my boat in the water over the 4th of July. I put it in and it fired without issue, except for one.

The 11" screen shows my bow ballast bag as full. It is completely empty. I can try to fill it but Autowake keeps shutting it off.

Anyone else come across a similar problem? Possible solutions?

If you go into system settings you should be able to reset ballast level to empty or full.

[SSurfer321]

Thanks. I'll give that a shot this weekend.

[SSurfer321]

If you go into system settings you should be able to reset ballast level to empty or full.

Thanks for the tip. That fixed it.

[Holdmybeer]

Good to hear it was a simple fix.