Quote Originally Posted by Dukabor View Post
And since I have already been drilling away, I may try one more thing on the board racks…. The Moombas have two positions for the board racks, outside the boat and then inside the boat while the Supras (and others) have a third ‘middle’ position…. That middle position allows for the racks to be more ‘parallel’ to the boat, and less in the way in this neutral position (assuming there are no boards in them)…. Will only require one hole to be drilled on the bottom of the bracket (circled in red below)

I’ve probably confused the heck out of everyone with that description…


Sent from my iPad using Tapatalk

IMG_6489.jpg
The old school pin pull swivel racks has 3 positions like the Supras. The mag swivels like you have only have the 2 positions but not sure if just drilling a hole will allow this. If the pin just drops in then you should be able to jist drill and go. If it doesn't work it's a $250 mistake, just giving you a heads up.