![Quote](images/misc/quote_icon.png)
Originally Posted by
contra1833
Hello,
So I’ve taken the Black piece off under the dash and found the rgb power connection to hook a module up to it. But I still can’t find the led wires to plug into it? Any idea where they could be? Any help would be greatly appreciated
Sent from my iPhone using Tapatalk
The plug under the dash is 2 pin, and wired to the RGB switch. The LED strips in the boat are RGB strips but the wire that runs around the boat is only 2 wire if you do not have the RGB option.
You would need to either order the OEM ITC Versicolor controller or a cheap controller of your own, the 2 pin (+) and (-) connection under the dash would provide power to a RGB controller.. then you would run the RGB wire to the controller.
2023 Moomba Max
1,345 WM Rear| 860 WM Bow bag's + 800lbs lead = 6,350lbs | Prop-3591
2014 Moomba Mojo 2.5- SOLD
Tow- 2002 F-350 Super Duty 7.3L PSD