Quote Originally Posted by Hayden View Post
Glad you were able to get on the water and things worked out! If you do end up using the the 16x13 keep an eye on your gelcoat right at the closest point of prop rotation. On the 2021's we can't get much closer than 15.75" unless you put a plate/patch on there. I don't know if they put more clearance on the 2022's.
Thanks…. We kinda ran out of time to swap it on and give it a back to back shot, but you are right, not a ton of room under there…. Not to mention it was a tad tight with the puller, will try with an impact gun to not crank on the shaft with a bar…. Will send results when I slip it on there with some reference to the clearance