Ballast timers

[j.mo]

You should be able to manually set your bags to 0% or 100% in the vessel settings.
You can also change the timers but not sure about 0.

Check for debris blocking the inlet of the ballast pump under the boat. Next would be shutting the ball valve and then changing the impeller on the water.

Changed the impeller right on the water lol.
It was smoked, which is disheartening because it was the one I just put in a few weeks ago!!
I had the old ones as spares in the glovebox.

Not ideal, but I’m getting pretty good at it


Sent from my iPhone using Tapatalk