Glove Box

[tazz3069]

I just took the cover off. It is 8" wide by 3.5" high. I would definatly need to modify the opening for the glove box. I looked inside and the only thing I see are what I have stored in the seat behind me and the four bolts that hold the driver seat down.

[cab13367]

My '07 has the blank plate and until this thread i had no clue why it was there. What's the purpose i wonder? Seat base access?

Razzman,

I think you are right - it is probably for seat base access. I think the 2007s have a different driver's seat than the 2006s so that's probably why mine doesn't have it.

Al

[rbc_racing]

I got the glove box out of a supra for my 07 lsv, and I had to make the opening bigger so it would fit. I also had to shorten the front 2 studs for the seat frame so the glove box would slide in. I had to cut the studs because the factory hole wasn't cut square and it was to high on one corner. it worked out well the only thing I dont like about it is the size of the storage drawer, it will hold my phone, wallet, car keys, goggles and diving knife and most people dont even know its there.

[Razzman]

So how much was the Supra box? Is it like the aftermarket ones or is it a drawer?

[rbc_racing]

So how much was the Supra box? Is it like the aftermarket ones or is it a drawer?

It was a drawer, I dont remeber what it cost it wasn't much though. It isn't water proof but it doesn't get dripped on where its at and if water reaches it from the bottom your cellphone will be the least of your worries.