
Originally Posted by
sleek98
They are L shaped bags from the factory and they are 1,400#.
The long leg runs under the bench seat and the top section thats taller fills up some of the locker space in the rear. You can add quite a bit of height to the rear bag if you dont want to use the bin.
This is the stock bag.
Here is the video Hayden did with both bags blown up next to each other.
https://www.youtube.com/watch?v=XoNT...l=HaydenBreeze
That is awesome!! I assume the long leg that goes forward in a sort of tunnel under the bench seat and is still under a removable floor so there is storage under the bench seats? If so that is a great design and I wonder if they will or have adopted that for the Makai. My 2019 Makai factory has a 1,000# rear locker bag and then piggy backed off of that is a 400# bag that is under the removable floor under the bench seats. I like the L shape design way better as I am about to install my 1,345# bags in the rear and I am putting a top vent T'd into the over flow so that I don't have to burp my bags any more but I am trying to figure a way to do the same for the 400# bags as well. The L shaped bag eliminates the need to have a vent on the 400# bag which is awesome! On a side note how does Wake Makers not have replacements for the Mojo yet?
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead