




I got to thinking yesterday….we have a 17 SA with three pumps. Think I could plumb 3 more into our current system? I’m good with plumbing and decent with electrical stuff. Thoughts?
Sent from my iPhone using Tapatalk
Short answer, yes. I think the biggest hurdle is going to be having an unused port on the sac/tank for filling/draining.
Maybe I’m under thinking the project. I was thinking I could plumb them in series with the same fill port tube. Maybe not?
Sent from my iPhone using Tapatalk
The only gain is going to be parallel pumps or higher capacity pumps. With 2 pumps in series, your final flow rate is likely going to be that of the last pump, rather then summed flow rate of the 2 pumps.
Start up amps on a jabsco puppy pump is around 20 amps. You may need to upgrade breakers.
Perhaps upgrade to a jabsco king pump?
King 15GPM
Puppy 9 GPM
Sent from my iPhone using Tapatalk
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
Thanks bro. Looks like I’m back to planning plan A of 6 puppies in parallel.
Sent from my iPhone using Tapatalk