
Originally Posted by
rockymtnsurfer
1200's rear, but sometimes less in order to get my 9 pitch. 1000's midship, 1000' center and 0-500 front.
I fill all these different to get my pitch and role to 9 and 0 - -2
Side tabs work, and leave at 100% and middle plate works and 0-25%
Wave is great....long and medium height.....I go a little steeper for one of my teens who like it steeper.
yes 2 hand grip.....now you know what I mean.....nuts. And it was this way when I had a stock set up and immediately took it back to the dealer, who checked it out and said everything was fine. I truly just don't get it. After 2 summers of this, and 4-5 trips to 2 different dealers, I am sort of giving up and about ready to buy a new boat. I will get a Moomba, because I like them, but if production wasn't so far behind, I would have bought a new one by now and traded in this boat to one of the dealers who said everything was fine. So I feel what the heck, lets change out the cable.
Next time out. Fill everything but make sure your tabs and center plate are all retracted up. I know the wave will suck but just curious if others are correct and the tab is causing all the problems with your turning. You say tabs are at 100%. I heard most having the tabs at 60% regular and 80% goofy when surfing, this could be your steering issue. Weighted that heavy and low in the water plus 100% tab is a lot of drag. But trust me, I understand wanting that perfect wave.
The cable is not priced horrible, but the time lost to change something that may or may not have affect on your problem, would be the killer. I have thrown money at problems with cars, houses, etc. and its great when it fixes it but when it doesn't it just leaves you more frustrated.
2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow