Results 1 to 10 of 19
Thread: Can anyone identify this?
-
06-01-2021, 10:07 AM #1
Can anyone identify this?
I meant to post this a long time ago, but forgot. I found this laying under the seat in the front passenger side compartment. It's definitely a divider or bulkhead of some sort, but for the life of me I cannot figure out where it went/goes. I discovered it after getting the boat home from the dealership. I called and they were not sure what I was talking about. I figured that I would be able to see where it fit, but no luck. Probably so simple or obvious I am overlooking it.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-01-2021, 10:22 AM #2
Is this on a new boat that just came from the factory or did you have it in the shop for repairs?
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
06-01-2021, 01:26 PM #3
Looks like a flux capacitor to me.
2016 Starcraft Limited 1918 (sold)
2021 MB Sports B52 Alpha (coming April 2021)
2020 Toyota Tundra TRD Pro
2022 F-150 SCREW PB (ordered 12/2021...still waiting)
B-737 (Work Vehicle)
-
06-01-2021, 02:27 PM #4
It's on a 2021 Makai. Brand new. I was trying to make it fit somewhere the wet sounds amps or subwoofer is at. Thinking they took it off to mount them, but just can't seem to make it work out.
And it doesn't have enough wiring on it to generate the needed 1.21 "jigawatts", so it can't be a flux capacitor.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-01-2021, 08:30 PM #5Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Under helm.
Sent from my iPhone using Tapatalk
-
06-02-2021, 11:16 AM #6Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
I wonder if it's some template that they use at the factory to mark or cut something and they left it in your boat!
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
06-02-2021, 02:07 PM #7
I don't think it's a template. It has the push rivets/pins in it like it's a divider panel or cover for something. I am going to look under the helm real good like dakota4ce mentioned. That's where the subwoofer box is mounted too. I am thinking maybe it had to come out for that. I looked there briefly before, but didn't see any place that the push pins looked like they would have mated up. Now I am wondering if it's mounted horizontally above my knees in the helm. Nothing appears to be missing that I remember.
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-03-2021, 07:39 PM #8
The slot looks like the same size as a DIN radio. The groove looks like it slides into another panel. Perhaps a faux/beauty wall under the helm where the back of the back of the radio is?
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
06-03-2021, 08:31 PM #9
I'm gonna play with it some more this weekend and see. Anyone out there with another Moomba have anything similar anywhere on their boat. The helms on them are all pretty close to the same. 21 year model, but I bet 19 and up are almost identical.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-04-2021, 11:44 AM #10
The back of the helm is wide open on my '19 so I doubt it is from there. I had to access it to get to my USB to update my system so I spent a lot of time under there lol.
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead