Results 1 to 10 of 32
-
05-17-2021, 11:10 AM #1
Moomba Makai registration number placement
Does anyone have any photos of where they placed their decal and registration numbers on a Moomba Makai? My paint scheme seems to present a little bit of a challenge for spacing. There is a vent (might be the horn) located on the drivers side of the boat that makes my space limited for putting them just under the rub rail. Just curious if anybody else has a similar scheme they have put numbers on.
Sent from my moto z4 using TapatalkLast edited by HFarr; 05-17-2021 at 11:22 AM.
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-17-2021, 11:22 AM #2
-
05-17-2021, 11:35 AM #3
Those look sharp. Looks like they match the MOOMBA letters exactly. I think the front hull lines on the Makai are a little different though. It seems to have more breaks in it. I have roughly 21 inches to work with.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-17-2021, 11:36 AM #4
I didn't see your reg decal. Where did you put it?
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-17-2021, 11:40 AM #5
Had the same issue on our Makai. Here is what I had to do. I wasn’t in love with having to go above the rub rail but it was the only space the legal spacing would fit. I even had to get a second set of domed numbers as the first color combo I had was for a black background.
Sent from my iPhone using Tapatalk2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
05-17-2021, 11:44 AM #6
-
05-17-2021, 01:16 PM #7
Use the horn vent as the 6 inch separation then use the 21 inches of space you have to fit the numbers.
2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
05-17-2021, 01:43 PM #82021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-17-2021, 01:49 PM #9
TXsurf4,
I forgot that I had already seen your boat pics in some other posts. That doesn't look too bad. I may end up that route. From the pics above, it looks like our front ends are slightly different? Maybe its just where the Gatorstep is placed, or light reflections. Did anything change on these from 19 to 21?
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-17-2021, 02:01 PM #10