![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
I saw a couple people ask if you can put side tow points on the a3 but didn't see an answer. Has anyone done it on an a3 and any negative issues doing so?
I reached out to this guy and he said in about a month he will have tow points that clamp to the A3 tower. I am guessing it will be just like these but with a 2 3/8 clamp.
https://uptice.com/products/copy-of-...g-holder-combo
Sent from my SM-G960U1 using Tapatalk
- Jason
2019 Moomba Max
Has anyone located side tow points for the A3 tower?
Sent from my iPhone using Tapatalk
On uptice.com I saw some that bolt on using the back bolt of the Bimini. They show them for the pro tower, but I’m guessing that they’d work on any of the newer towers.
2013 Outback V
2018 Helix sold
2007 Centurion elite sold
This is what the Pro Tower side pulls on my 21 Makai look like
Sent from my moto z4 using Tapatalk
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
I just got the Uptice side tow points in for the a3 tower. Did y’all use locktite or similar when installing? Any specific torque value? Or should I apply anti seize and just check them every so often?
2018 Moomba MOJO
4100lbs. ENZO's, Center Tank, IBS
780lbs. Lead Wake
Raptor 400
Surf Prop: OJ 945
2019 Ford F150 FX4
5.0L V8