




Well, thanks for pointing me in the direction for the access hole, I already had it covered with junk and didn’t even realize it was there.
The vent or overflow line wasn’t hooked up to the bag...simple fix!
08A9100E-1737-4A59-B2BD-7C2C08877BD2.jpg
Anyone know how to bleed the air out of the front Makai bag? I see the air vents on the two back bags. By the way they had a lot of air in them. I purged them filled them tight again, then next time I emptied and refilled, the air was right back again! Any thoughts?
Sent from my moto z4 using Tapatalk
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
Here is a video of me venting the air out of one of my rear bags. This is after the pumps filled it, shut off, and I rand them some more until water came out of the overflow. I was able to fill it more after venting too. Built like I said, when I drained them and filled again, air was right back in there. Also when I drain them, there is always some water left in the bottom. Probably 4" worth. I ran the pumps more, but it just won't suck it all out.
https://youtu.be/JvPQ9EbPzy0
Sent from my moto z4 using Tapatalk
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub